Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The products are intended for indoor use as side tables or decorative stands supporting objects of limited size and weight. Each item must be used separately, in an upright position, on a level, stable, clean and dry surface.
Safety and warnings
✔ If assembly is required, follow the instructions supplied by the manufacturer.
✔ Before use, ensure that the glass tops are correctly positioned and secured.
✔ Check the stability of the metal structures, bases, welds and fasteners.
✔ Place each table on a level, stable, clean and dry surface.
✔ Make sure that the entire base remains in contact with the floor.
✔ Do not use the products on sloping, uneven or slippery floors.
✔ Due to their tall shape and limited surface area, position the tables where they cannot be accidentally struck or pushed.
✔ Do not place the products in walkways, near doors or in areas where they may be easily knocked over.
✔ Do not sit, stand or climb on the tables.
✔ Do not use the products as seats, stools, ladders, steps or work platforms.
✔ Do not allow children to climb, hang or play on or around the products.
✔ Do not exceed the maximum load specified by the manufacturer. If none is stated, use the tables only for lightweight objects.
✔ Position objects in the centre of each tabletop.
✔ Do not place heavy, bulky or unstable objects on the tables.
✔ Do not place objects on the edges or allow them to extend beyond the tabletop.
✔ Do not apply lateral pressure or place your entire body weight against the products.
✔ Do not strike the glass or drop objects onto it.
✔ Do not scratch the tops with metal, ceramic or sharp objects.
✔ Avoid thermal shock. Do not place very hot or very cold objects directly on the glass.
✔ Use heat-resistant mats under hot containers and objects.
✔ Do not use a table if the glass is cracked, chipped, deeply scratched, loose or detached from its support.
✔ If the glass breaks, keep people and animals away from the area.
✔ Collect fragments only while wearing protective gloves and closed footwear.
✔ Do not use the products if the metal structure is bent, corroded, unstable or has damaged welds.
✔ This product is not a toy. Children must be supervised when near it.
✔ Keep small components and packaging materials out of the reach of children.
Use
✔ Use each table separately and in its normal upright position.
✔ Do not stack or place the tables on top of one another.
✔ Do not connect or secure the items together unless this use is specified by the manufacturer.
✔ Place objects gently in the centre of the tabletop without impact against the glass.
✔ Use protective mats under glasses, containers, vases and decorative objects.
✔ Do not leave fragile objects or containers of liquid unattended on tables positioned in busy areas.
✔ Do not drag or push the tables across the floor.
✔ Remove all objects from the tabletop before moving an item.
✔ Lift each item separately by supporting its metal structure.
✔ Do not lift or transport the tables solely by holding the glass top.
✔ If a top is removable, transport it separately in an upright position with suitable protection.
✔ Wear protective gloves when separately handling glass components.
✔ Use suitable protective pads under the base when placing the products on parquet or other sensitive flooring.
✔ Regularly check the stability of each table and security of the top.
Care and maintenance
✔ Remove dust from the glass using a soft, clean and lint-free cloth.
✔ Clean the glass using a suitable solution and a soft cloth.
✔ Spray the solution onto the cloth, not directly onto the glass edges or joints.
✔ Wipe up water and other spilled liquids immediately.
✔ Do not use abrasive sponges, blades, metal brushes or cleaning powders.
✔ Do not use sharp objects to remove stains.
✔ Clean the metal structure using a soft, dry or very slightly damp cloth.
✔ Dry the metal immediately after cleaning to reduce the risk of corrosion.
✔ Do not use solvents, bleach or abrasive products that may damage the gold finish.
✔ Avoid prolonged exposure to water, high humidity and direct sunlight.
✔ Regularly inspect the glass, bases, metal structures, welds and fasteners.
✔ Stop using the product if cracks, chips, deformation or instability are observed.
✔ Repairs and glass replacement must be performed only by competent persons using compatible components.
Packaging and disposal
✔ Remove all packaging materials before using the products.
✔ Do not allow children to play with plastic film, bags, straps, staples or other packaging components. These may present a suffocation or injury hazard.
✔ Handle the packaging of the glass components carefully, as it may contain rigid or sharp elements.
✔ Sort cardboard, plastic and other packaging materials according to local collection regulations.
✔ Broken glass must be collected while wearing gloves and packaged so that it cannot cause cuts.
✔ Do not place unprotected glass fragments in ordinary waste containers.
✔ At the end of the products’ service life, dispose of them according to local regulations.
✔ Where possible, separate the metal, glass and plastic components before recycling or disposal.
