Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The products are intended for indoor use as side tables or decorative furniture supporting objects of limited size and weight. The mirrored surfaces have both a functional and decorative role and must be protected against impact, scratches and sudden temperature changes.
Safety and warnings
✔ If assembly is required, follow the instructions supplied by the manufacturer.
✔ Before use, ensure that the MDF and mirrored surfaces are correctly positioned and secured.
✔ Check the stability of the metal structure, legs, welds and fasteners.
✔ Place each table on a level, stable, clean and dry surface.
✔ Make sure that all legs or supporting points remain in full contact with the floor.
✔ Do not use the products on sloping, uneven or slippery floors.
✔ Do not sit, stand or climb on the tables.
✔ Do not use the products as seats, stools, ladders, steps or work platforms.
✔ Do not place your entire body weight on the tabletop or product edges.
✔ Do not exceed the maximum load specified by the manufacturer. If none is stated, avoid overloading.
✔ Distribute objects evenly across the table surface.
✔ Do not place heavy, bulky or unstable objects on the edge of the tabletop.
✔ Do not apply concentrated pressure or drop heavy objects onto the mirrored surfaces.
✔ Do not slide metal, ceramic, abrasive or sharp-edged objects across the tabletop.
✔ Do not use the product if the mirror is cracked, chipped, deeply scratched, loose or detached from its support.
✔ Avoid thermal shock. Do not place very hot or very cold objects directly on the mirror.
✔ Use heat-resistant mats under containers and appliances that may generate heat.
✔ Wipe up water and other spilled liquids immediately.
✔ Avoid exposing MDF to water, steam or persistent moisture, as it may swell, deform or become damaged.
✔ Do not push the table by placing your entire body weight on the top.
✔ Do not allow children to climb, jump or play on or underneath the product.
✔ If the mirror breaks, keep people and animals away from the area.
✔ Collect fragments only while wearing protective gloves and closed footwear.
✔ Do not collect fragments with unprotected hands.
✔ Do not use the product if the metal structure is bent, corroded, unstable or has damaged welds.
✔ Keep the products away from open flames, radiators and other direct heat sources.
✔ This product is not a toy. Children must be supervised when near it.
✔ Keep small components and packaging materials out of the reach of children.
Use
✔ Position the tables where they do not obstruct walkways.
✔ Place objects gently without impact against the mirrored surfaces.
✔ Position objects towards the centre of the tabletop and distribute weight evenly.
✔ Use protective mats under glasses, containers, vases and decorative objects.
✔ Do not slide objects across the mirror. Lift them before repositioning.
✔ Do not leave containers of liquid unattended on the table.
✔ Do not drag or push the products across the floor.
✔ Remove all objects from the tabletop before moving the product.
✔ Lift the table by supporting its metal frame or structural base.
✔ Do not lift or transport the product solely by holding the tabletop, MDF or mirrored surfaces.
✔ At least two people are recommended when moving the larger table.
✔ If a mirrored surface is removable, transport it separately in an upright position with suitable protection.
✔ Wear protective gloves when separately handling mirrored surfaces.
✔ Use suitable protective pads under the legs when placing the products on parquet or other sensitive flooring.
✔ Regularly check the stability of the structure and security of the mirrored surfaces.
Care and maintenance
✔ Remove dust from the mirror using a soft, clean and lint-free cloth.
✔ Clean the mirrored surfaces using a suitable glass cleaner and a soft cloth.
✔ Spray the solution onto the cloth, not directly onto the surface, to prevent liquid from entering the edges.
✔ Wipe up water and other spilled liquids immediately.
✔ Do not use abrasive sponges, blades, metal brushes or cleaning powders.
✔ Do not use substances that may damage the reflective coating of the mirror.
✔ Clean the MDF using a soft, dry or very slightly damp cloth.
✔ Do not soak the MDF with water or allow liquid to enter the edges or joints.
✔ Clean the metal structure using a soft, dry or very slightly damp cloth.
✔ Dry the metal immediately after cleaning to reduce the risk of corrosion.
✔ Do not use bleach, solvents or abrasive products that may damage the gold finish.
✔ Avoid prolonged exposure to high humidity and direct sunlight.
✔ Regularly inspect the mirror, MDF, legs, metal structure, welds and fasteners.
✔ Stop using the product if cracks, chips, deformation, detachment or instability are observed.
✔ Repairs and replacement of mirrored surfaces must be performed only by competent persons using compatible components.
Packaging and disposal
✔ Remove all packaging materials before using the products.
✔ Do not allow children to play with plastic film, bags, straps, staples or other packaging components. These may present a suffocation or injury hazard.
✔ Handle the packaging of the mirrored surfaces carefully, as it may contain rigid or sharp elements.
✔ Sort cardboard, plastic and other packaging materials according to local collection regulations.
✔ Mirror fragments must be collected while wearing gloves and packaged so that they cannot cause cuts.
✔ Do not place unprotected fragments in ordinary waste containers.
✔ Do not burn the product or its MDF components. Burning MDF may generate hazardous smoke and substances.
✔ At the end of the products’ service life, dispose of them according to local regulations.
✔ Where possible, separate the metal, MDF, mirror and plastic components before recycling or disposal.
