Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The product is intended for indoor use as a tall bedside table or auxiliary furniture for organising and storing personal objects of limited size and weight. It may be placed in bedrooms, dressing rooms or other suitable indoor residential spaces.
Safety and warnings
✔ Assemble the product according to the instructions supplied by the manufacturer.
✔ Before use, ensure that the base, legs, screws, handles and all fasteners are correctly fitted and securely tightened.
✔ Place the product on a level, stable, clean and dry surface.
✔ Make sure that all supporting points remain in full contact with the floor.
✔ Do not use the product on sloping, uneven or slippery floors.
✔ Do not sit, stand or climb on the bedside table.
✔ Do not use the product as a seat, stool, ladder, step or work platform.
✔ Do not place your entire body weight on the tabletop or product edges.
✔ Do not exceed the maximum load specified by the manufacturer. If none is stated, avoid overloading the tabletop, drawer and compartments.
✔ Distribute objects evenly across the top and inside the storage spaces.
✔ Do not place heavy objects on the edge of the tabletop.
✔ Open and close the drawer or compartments carefully.
✔ Keep hands and fingers away from edges, runners and other moving mechanisms to prevent entrapment or crushing.
✔ Do not leave the drawer open when the product is not in use.
✔ Do not allow children to climb, hang or lean on the open drawer.
✔ Store heavier objects as low and centrally as possible to maintain product stability.
✔ If the product includes a wall anchoring system, use it according to the manufacturer’s instructions.
✔ Wall fasteners must be selected according to the type and strength of the wall.
✔ Do not place very hot, wet or sharp-edged objects directly on the tabletop.
✔ Do not place lit candles or other flame sources on the product.
✔ Keep the bedside table away from stoves, radiators and other direct heat sources.
✔ Avoid prolonged contact with water, steam and high humidity.
✔ Pine wood and MDF may swell, deform or become damaged through prolonged contact with moisture.
✔ Plastic components may deform, discolour or melt near high temperatures.
✔ Do not use the product if it is unstable or has cracked wood or MDF, bent metal, cracked plastic or loose fasteners.
✔ This product is not a toy. Children must be supervised when near it.
✔ Keep small components and packaging materials out of the reach of children.
Use
✔ Use the product only after it has been completely assembled and its stability has been checked.
✔ Distribute objects evenly and avoid concentrating weight at a single point.
✔ Use the handle when opening and closing the drawer.
✔ Do not force the drawer or pull it beyond the limit allowed by the mechanism.
✔ Do not store very heavy, wet, hot, sharp, flammable or hazardous objects.
✔ Do not push the product by placing your entire body weight against it.
✔ Lift the bedside table when moving it. Do not drag or push it across the floor.
✔ Empty and close the drawer and compartments before moving the product.
✔ Lift the product by supporting its frame or structural base, without pulling the tabletop, drawer, handle or decorative elements.
✔ Two people are recommended when moving the product, especially when it is fully assembled.
✔ Use suitable protective pads under the base or legs when placing the product on parquet or other sensitive flooring.
✔ Regularly check stability and tighten the fasteners when necessary.
Care and maintenance
✔ Remove dust using a soft, clean and dry cloth.
✔ For light dirt, use a slightly damp cloth and dry the surface immediately.
✔ Wipe up spilled water, cosmetics and other liquids immediately.
✔ Do not allow liquids to enter joints, edges, the drawer or compartments.
✔ Do not use excessive amounts of water or soak the wood or MDF.
✔ Do not use abrasive cleaners, bleach, solvents, alcohol, hard sponges or metal objects.
✔ Test any cleaning product on an inconspicuous area.
✔ Use protective mats under glasses, containers, lamps and decorative objects.
✔ Clean the metal components with a soft, dry cloth. If a damp cloth is used, dry the metal immediately.
✔ Clean the plastic components with a soft cloth and a mild detergent.
✔ Do not apply solvents or abrasive products to plastic, as these may dull, crack or discolour it.
✔ Do not use steam-cleaning equipment.
✔ Avoid prolonged exposure to direct sunlight, as this may alter the appearance of the finish and plastic components.
✔ Regularly inspect the base, drawer, handle, screws and other fasteners.
✔ Stop using the product if cracks, deformation, corrosion or instability are observed.
✔ Structural repairs must be performed only by competent persons using compatible parts.
Packaging and disposal
✔ Remove all packaging materials before using the product.
✔ Do not allow children to play with plastic film, bags, straps, staples or other packaging components. These may present a suffocation or injury hazard.
✔ Sort cardboard, plastic and other packaging materials according to local collection regulations.
✔ Do not burn the product or its components. Burning treated wood, MDF or plastic may generate hazardous smoke and substances.
✔ At the end of the product’s service life, dispose of it according to local regulations.
✔ Where possible, separate the pine wood, MDF, metal and plastic components before recycling or disposal.
