Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The product is intended for indoor use as furniture for organising and storing personal or household objects of suitable size and weight. It may be placed in bedrooms, living rooms, hallways, dressing rooms or other suitable indoor residential spaces.
The upholstered surfaces and PU components are decorative and must be protected against moisture, abrasion, sharp objects and heat sources.
Safety and warnings
✔ Assemble the product according to the instructions supplied by the manufacturer.
✔ Before use, ensure that the metal base, legs, screws, handles and all fasteners are correctly fitted and securely tightened.
✔ Place the cabinet on a level, stable, clean and dry surface.
✔ Make sure that all supporting points remain in full contact with the floor.
✔ Do not use the product on sloping, uneven or slippery floors.
✔ Do not sit, stand or climb on the cabinet.
✔ Do not use the product as a seat, ladder, step or work platform.
✔ Do not place your entire body weight on the top, drawers, doors or edges of the product.
✔ Do not exceed the maximum load specified by the manufacturer. If none is stated, avoid overloading the top, drawers and compartments.
✔ Distribute objects evenly across the top and inside the storage spaces.
✔ Store heavier objects in the lower compartments and as close as possible to the centre of the product.
✔ Do not place heavy or unstable objects on the edges of the top.
✔ Do not open several loaded drawers at the same time, as the product may become unstable and tip over.
✔ Open and close drawers and compartments carefully.
✔ Keep hands and fingers away from edges, hinges, runners and other moving mechanisms to prevent entrapment or crushing.
✔ Do not leave drawers or doors open when the product is not in use.
✔ Do not allow children to climb, hang or lean on open drawers or doors.
✔ If the product includes a wall anchoring system, use it according to the manufacturer’s instructions.
✔ Fasteners must be selected according to the type and strength of the wall.
✔ Keep the product away from open flames, lit cigarettes, candles, stoves, radiators and other direct heat sources.
✔ Textile and PU materials may ignite, melt, deform or become damaged when exposed to fire or high temperatures.
✔ Do not place very hot, wet or sharp-edged objects directly on the top.
✔ Avoid prolonged contact of wood, textile and PU with water, steam or high humidity.
✔ Do not use the product if it is unstable or has loose joints, cracked wood, bent metal, torn upholstery or cracked or detached PU.
✔ Stop using the product immediately if deformation, unusual noises or structural damage are observed.
✔ This product is not a toy. Children must be supervised when near it.
✔ Keep small components and packaging materials out of the reach of children.
Use
✔ Use the product only after it has been completely assembled and its stability has been checked.
✔ Distribute objects evenly across the top and inside the compartments.
✔ Do not concentrate weight at a single point or on the edges of the product.
✔ Use the handles when opening and closing drawers or doors.
✔ Do not force the drawers or pull them beyond the limit allowed by the mechanism.
✔ Do not leave drawers or doors open unnecessarily.
✔ Do not store very heavy, wet, hot, sharp, flammable or hazardous objects.
✔ Use protective mats under glasses, containers, vases, lamps and decorative objects.
✔ Lift the cabinet when moving it. Do not drag or push it across the floor.
✔ Empty all drawers and compartments before moving the product.
✔ Close and, where possible, secure all moving components before transport.
✔ Due to the product’s size and weight, it must be moved by at least two people.
✔ Lift the product by supporting its base or structural frame. Do not pull the top, upholstery, drawers, doors or handles.
✔ Use suitable protective pads under the base when placing the product on parquet or other sensitive flooring.
✔ Regularly check the stability, drawers, doors and fasteners.
Care and maintenance
✔ Remove dust from the upholstered surfaces using a soft cloth, a delicate brush or a vacuum cleaner set to low power.
✔ Treat stains on the textile immediately by gently blotting them without aggressive rubbing.
✔ Use a clean white cloth, very slightly dampened, and a mild detergent suitable for textiles.
✔ Test any cleaning product on an inconspicuous area.
✔ Clean PU using a soft, slightly damp cloth and dry the surface immediately.
✔ Do not soak the textile, PU or wood with water.
✔ Do not use bleach, solvents, alcohol, acetone, abrasive products or aggressive chemicals.
✔ Do not use hard brushes, abrasive sponges or metal objects.
✔ Do not use steam-cleaning equipment unless this method is expressly authorised by the manufacturer.
✔ Do not use a hair dryer, radiator or another direct heat source to dry the surfaces.
✔ Wipe up spilled water, cosmetics and other liquids immediately.
✔ Clean the wooden components using a soft, dry or very slightly damp cloth.
✔ Clean the metal structure using a soft, dry cloth. If a damp cloth is used, dry the metal immediately.
✔ Do not use abrasive products that may damage the gold finish.
✔ Avoid prolonged exposure to direct sunlight, as this may alter the appearance of the textile, PU and finishes.
✔ Regularly inspect the base, legs, drawers, hinges, handles, seams and fasteners.
✔ Stop using the product if cracks, detachment, deformation, corrosion or instability are observed.
✔ Structural repairs must be performed only by competent persons using compatible parts.
Packaging and disposal
✔ Remove all packaging materials before using the product.
✔ Do not allow children to play with plastic film, bags, straps, staples or other packaging components. These may present a suffocation or injury hazard.
✔ Sort cardboard, plastic and other packaging materials according to local collection regulations.
✔ Do not burn the product or its components. Burning textile, PU, treated wood or plastic may generate hazardous smoke and substances.
✔ At the end of the product’s service life, dispose of it according to local regulations.
✔ Where possible, separate the metal, wood, textile, PU and plastic components before recycling or disposal.
