Economic Operator Information
✔ Manufacturer and EU responsabile person MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9 – 01024 – Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended Use
✔ Vertical wall decoration made of metal and intended exclusively for indoor use.
✔ Designed as an ornamental object for installation in a vertical position on an indoor wall.
✔ Suitable for living rooms, bedrooms, offices, hallways or other dry indoor areas.
✔ Intended exclusively for decorating indoor spaces.
Safety and Warnings
⚠ This product is not a toy — keep out of reach of children and pets.
⚠ Install the product only on a solid, stable wall suitable for its weight and dimensions.
✔ Use fixings appropriate for the wall type and product weight.
⚠ If the fixings are not supplied or are unsuitable for the wall, appropriate fixings must be purchased separately.
⚠ Before drilling, check for electrical wiring, water pipes and other concealed elements inside the wall.
⚠ If you are unsure about installation, seek assistance from a competent person.
⚠ Check the product’s stability after installation and periodically during use.
⚠ Do not install the product where a fall could cause injury or damage objects positioned underneath it.
⚠ The metal elements may have rigid or protruding edges — handle the product carefully, preferably while wearing protective gloves.
⚠ Do not use or reinstall the product if its structure, decorative elements, hanging system or attachment points are deformed, detached or damaged.
⚠ Keep away from open flames, direct heat sources, water and excessive humidity.
Use
✔ Use the product exclusively as an indoor wall decoration.
✔ Install the product only in its intended vertical orientation.
✔ Handle and install the product using both hands while supporting its main structure.
⚠ Do not lift or carry the product by its thin decorative elements or hanging system.
⚠ Do not hang other objects from the product or use it as a support, handle or load-bearing element.
⚠ Do not bend, force or apply pressure to the decorative metal elements.
⚠ Do not alter the structure or attachment system.
Care and Maintenance
✔ Remove dust regularly using a soft, dry cloth or a clean feather duster.
✔ Carefully clean the spaces between the decorative metal elements.
⚠ Do not use abrasive sponges, hard brushes, solvents, alcohol or aggressive chemicals.
⚠ Do not spray liquids directly onto the product.
✔ Immediately dry any traces of water or moisture.
✔ Periodically check the attachment system and product stability.
⚠ Avoid prolonged exposure to humidity to reduce the risk of corrosion or damage to the finish.
⚠ Avoid prolonged exposure to direct sunlight, as this may alter the colours and finish over time.
Packaging and Disposal
✔ Dispose of the packaging separately according to the local rules applicable to each material.
✔ At the end of its service life, dispose of the product according to local regulations applicable to metal objects and components.
