Economic Operator Information
✔ Manufacturer and EU responsabile person MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9 – 01024 – Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended Use
✔ Wall decoration with a mirror and marine-themed decorative elements, made of metal and MDF and intended exclusively for indoor use.
✔ Designed as an ornamental object for installation on an indoor wall.
✔ Suitable for living rooms, bedrooms, offices, hallways or other dry indoor areas.
✔ Intended exclusively for decorating indoor spaces.
Safety and Warnings
⚠ This product is not a toy - keep out of reach of children and pets.
⚠ Install the product only on a solid, stable wall suitable for its weight and dimensions.
✔ Use fixings appropriate for the wall type and product weight.
⚠ If the fixings are not supplied or are unsuitable for the wall, appropriate fixings must be purchased separately.
⚠ Before drilling, check for electrical wiring, water pipes and other concealed elements inside the wall.
⚠ Due to the product’s dimensions and shape, handling and installation by two people are recommended.
⚠ If you are unsure about installation, seek assistance from a competent person.
⚠ Check the product’s stability after installation and periodically during use.
⚠ The mirror is fragile - avoid impact, pressure and rough handling.
⚠ If broken, the mirror may produce fragments and sharp edges that could cause cuts.
⚠ The decorative metal elements may have rigid or protruding edges - handle the product carefully.
⚠ Do not use or reinstall the product if its mirror, structure, decorative elements or attachment points are damaged.
⚠ Keep away from open flames, direct heat sources, water and excessive humidity.
Use
✔ Use the product exclusively as an indoor wall decoration with a mirror.
✔ Handle and install the product using both hands while supporting its main structure.
⚠ Do not lift the product by its decorative elements, mirror or hanging system.
⚠ Do not hang objects from the product or use it as a support or handle.
⚠ Do not lean against or apply pressure to the mirror or decorative elements.
⚠ Do not alter the structure or attachment system.
Care and Maintenance
✔ Remove dust from the metal and MDF structure using a soft, dry cloth.
✔ Clean the mirror using a soft cloth, applying the cleaning solution to the cloth rather than directly to the product.
⚠ Do not allow liquids to enter behind the mirror, into the MDF or into the joints.
⚠ Do not use abrasive sponges, sharp objects, solvents or aggressive chemicals.
✔ Periodically check the attachment system and product stability.
Packaging and Disposal
✔ Dispose of the packaging separately according to the local rules applicable to each material.
⚠ If the mirror breaks, wear protective gloves and collect the fragments carefully.
✔ At the end of its service life, dispose of the product according to local regulations applicable to metal, MDF and glass.
