Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The product is intended for indoor use as a coffee table supporting household objects of limited size and weight. The mirrored surfaces have both a functional and decorative role and must be protected against impact, scratches and sudden temperature changes.
Safety and warnings
✔ Assemble the product according to the manufacturer’s instructions.
✔ Before use, check that all mirrored surfaces are securely fitted.
✔ Check the stability of the iron structure, legs, welds and fasteners.
✔ Place the table on a level, stable, clean and dry surface.
✔ Do not sit, stand or climb on the table.
✔ Do not use the product as a seat, ladder, step or work platform.
✔ Do not exceed the maximum load specified by the manufacturer. If none is stated, avoid overloading the surfaces.
✔ Distribute objects evenly and do not concentrate weight at a single point.
✔ Do not place heavy objects on the edges of the mirrored surface.
✔ Do not strike the mirror or drop objects onto it.
✔ Do not use sharp, metal or abrasive objects directly on the surface.
✔ Do not use the table if the mirror is cracked, chipped, deeply scratched, loose or detached from its support.
✔ Avoid thermal shock and do not place very hot or very cold objects directly on the mirror.
✔ Use protective mats under containers, glasses and decorative objects.
✔ Do not push the product by placing your entire body weight on the upper surface.
✔ Do not allow children to climb, jump or play on or underneath the table.
✔ If the mirror breaks, isolate the area and wear protective gloves and footwear when collecting fragments.
✔ Do not collect fragments with unprotected hands.
✔ Do not use the product if the iron structure is unstable, bent, corroded or has damaged welds.
✔ This product is not a toy. Children must be supervised when near it.
Use
✔ Position the table where it does not obstruct walkways.
✔ Place objects gently without impact against the mirrored surfaces.
✔ Do not slide objects across the surface. Lift them before repositioning.
✔ Do not drag or push the table across the floor.
✔ Remove all objects before moving the product.
✔ Lift the product by its iron frame without pulling the mirrored surfaces.
✔ Due to the fragile components, two people are recommended when moving the table.
✔ If a mirrored surface is removable, transport it separately in an upright position with suitable protection.
✔ Use protective pads under the base on sensitive flooring.
✔ Regularly check the stability and security of the mirrored surfaces.
Care and maintenance
✔ Remove dust using a soft, clean and lint-free cloth.
✔ Clean the mirror using a suitable glass cleaner and a soft cloth.
✔ Spray the solution onto the cloth, not directly onto the surface, to prevent liquid from entering the edges.
✔ Wipe up water and other spilled liquids immediately.
✔ Do not use abrasive sponges, blades, metal brushes or cleaning powders.
✔ Do not use substances that may damage the reflective layer or metal finish.
✔ Clean the iron frame using a soft, dry or very slightly damp cloth.
✔ Dry the metal immediately after cleaning.
✔ Regularly inspect the mirror, frame, welds and fasteners.
✔ Repairs and mirror replacement must be performed by competent persons using compatible components.
Packaging and disposal
✔ Remove all packaging materials before use.
✔ Keep plastic film, bags, staples and small components away from children.
✔ Handle the packaging of mirrored surfaces carefully.
✔ Sort packaging materials according to local regulations.
✔ Mirror fragments must be safely wrapped and disposed of according to local glass disposal rules.
✔ Do not place unprotected fragments in ordinary waste containers.
✔ At the end of the product’s service life, separate the iron, mirror and plastic components where possible.
