Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The product is intended for indoor use as a coffee table or side table supporting household objects of limited size and weight. It must be placed on a level, stable, clean and dry surface.
Safety and warnings
✔ If assembly is required, follow the instructions supplied by the manufacturer.
✔ Before use, ensure that the ceramic top is correctly positioned and secured.
✔ Check the stability of the iron structure, base and all fasteners.
✔ Place the table on a level, stable surface capable of supporting the product’s weight.
✔ Make sure that the base remains in full contact with the floor.
✔ Do not use the product on sloping, uneven or slippery floors.
✔ Do not sit, stand or climb on the table.
✔ Do not use the product as a seat, stool, ladder, step or work platform.
✔ Do not exceed the maximum load specified by the manufacturer. If none is stated, avoid overloading the tabletop.
✔ Distribute objects evenly across the ceramic surface.
✔ Do not place heavy objects on the edges of the tabletop.
✔ Do not apply concentrated pressure or drop heavy objects onto the ceramic surface.
✔ Ceramic is a hard material, but it may crack, chip or break following an impact.
✔ Do not use the product if the ceramic top is cracked, chipped, loose or detached from its support.
✔ Avoid thermal shock. Do not place very hot or very cold objects directly on the ceramic surface.
✔ Use heat-resistant mats under hot containers and objects.
✔ Do not slide metal, ceramic or sharp-edged objects across the tabletop.
✔ Do not push the table by placing your entire body weight on the top.
✔ Do not allow children to climb, jump or play on or underneath the table.
✔ If the ceramic top cracks or breaks, stop using the product immediately.
✔ Collect fragments only while wearing protective gloves and closed footwear.
✔ Do not use the product if the iron structure is unstable, bent, corroded or has damaged joints.
✔ Protect the polyester components against sharp objects, abrasion and persistent moisture.
✔ Keep the product away from open flames, lit cigarettes, candles, stoves, radiators and other direct heat sources.
✔ Polyester is combustible and may ignite, melt or become damaged when exposed to fire or high temperatures.
✔ This product is not a toy. Children must be supervised when near it.
✔ Keep small components and packaging materials out of the reach of children.
Use
✔ Position the table where it does not obstruct walkways.
✔ Place objects gently without impact against the ceramic top.
✔ Use protective mats under glasses, containers, vases and decorative objects.
✔ Do not place wet, very hot or sharp-edged objects directly on the tabletop.
✔ Do not drag or push the product across the floor.
✔ Remove all objects from the tabletop before moving the product.
✔ Lift the table by supporting its base or structural frame.
✔ Do not lift or transport the product solely by holding the ceramic top or polyester material.
✔ Due to the weight and fragility of the ceramic, two people are recommended when moving the product.
✔ If the top is removable, transport it separately in an upright position with suitable protection.
✔ Wear protective gloves when separately handling the ceramic top.
✔ Use suitable protective pads under the base when placing the product on parquet or other sensitive flooring.
✔ Regularly check the stability of the table and security of the top.
Care and maintenance
✔ Remove dust from the ceramic using a soft, clean and dry cloth.
✔ For cleaning, use a slightly damp cloth and a mild, pH-neutral detergent.
✔ Wipe up spilled liquids immediately and completely dry the surface.
✔ Do not use abrasive powders, hard sponges, metal brushes, blades or sharp objects.
✔ Do not use solvents, bleach or aggressive chemicals.
✔ Do not use steam-cleaning equipment.
✔ Clean the iron components using a soft, dry or very slightly damp cloth.
✔ Dry the iron immediately after cleaning to reduce the risk of corrosion.
✔ Do not use abrasive products that may scratch or damage the metal finish.
✔ Remove dust from the polyester components using a soft cloth, a delicate brush or a vacuum cleaner set to low power.
✔ Treat stains on the polyester by gently blotting them without aggressive rubbing.
✔ Test any cleaning solution on an inconspicuous area.
✔ Do not soak the polyester with water or apply direct heat for drying.
✔ Avoid prolonged exposure to direct sunlight, as this may alter the appearance of the finish and material.
✔ Regularly inspect the ceramic top, base, iron structure and fasteners.
✔ Stop using the product if cracks, chips, deformation or instability are observed.
✔ Repairs and replacement of the top must be performed only by competent persons using compatible components.
Packaging and disposal
✔ Remove all packaging materials before using the product.
✔ Do not allow children to play with plastic film, bags, straps, staples or other packaging components. These may present a suffocation or injury hazard.
✔ Handle the packaging of the ceramic top carefully, as it may contain rigid or sharp components.
✔ Sort cardboard, plastic and other packaging materials according to local collection regulations.
✔ Ceramic fragments must be handled with gloves and packaged so that they cannot cause cuts or other injuries.
✔ Do not burn the product or its polyester components. Burning polyester may generate hazardous smoke and substances.
✔ At the end of the product’s service life, dispose of it according to local regulations.
✔ Where possible, separate the iron, ceramic, polyester and plastic components before recycling or disposal.
