Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The products are intended for indoor use as seating chairs in suitable residential or commercial spaces. Each chair is designed for use by one person and must be placed on a level, stable, clean and dry surface.
Safety and warnings
✔ Assemble each chair according to the instructions supplied by the manufacturer.
✔ Before use, ensure that the legs, screws and all fasteners are correctly fitted and securely tightened.
✔ Place the chairs on a level, stable, clean and dry surface.
✔ Make sure that all legs remain in full contact with the floor.
✔ Do not use the chairs on sloping, uneven or slippery floors.
✔ Each chair is intended for use by one person only.
✔ Do not exceed the maximum load specified by the manufacturer. If no maximum load is stated, avoid placing excessive stress on the product.
✔ Do not stand, jump or rock on the chair.
✔ Do not use the chair as a ladder, step, work platform or support for reaching elevated areas.
✔ Sit down carefully and distribute body weight evenly across the seat.
✔ Do not drop heavily onto the chair or subject the seat to repeated impacts.
✔ Do not sit on the extreme edge of the seat.
✔ Do not lean excessively sideways or backwards, as the chair may become unstable and tip over.
✔ Do not stand or place your entire body weight on the armrests or backrest.
✔ Do not use the product if it has bent legs, loose joints, damaged welds, cracked plywood, deformed foam, torn upholstery or open seams.
✔ Stop using the product immediately if instability, unusual noises or structural damage are observed.
✔ Keep the chairs away from open flames, lit cigarettes, candles, stoves, radiators and other direct heat sources.
✔ Foam and polyester are combustible materials and may ignite or become damaged when exposed to fire or high temperatures.
✔ Avoid prolonged exposure to water, high humidity, steam or direct sunlight.
✔ Plywood may swell, deform or delaminate through prolonged contact with moisture.
✔ This product is not a toy. Children must be supervised during use.
✔ Do not allow children to jump, climb or play unsupervised on the chairs.
✔ Keep small components and packaging materials out of the reach of children.
Use
✔ Use each chair only after it has been completely assembled and its stability has been checked.
✔ Sit in the central area of the seat without sudden movements.
✔ Keep all chair legs in contact with the floor during use.
✔ Do not apply concentrated pressure with knees, elbows or hard objects to the upholstery.
✔ Do not stack the chairs unless the manufacturer expressly states that stacking is permitted.
✔ Lift the chair when moving it. Do not drag or push it across the floor.
✔ Lift the product by supporting its structural frame without pulling the upholstery, seams, armrests or backrest.
✔ Do not move the chair while a person is seated on it.
✔ Keep the product away from sharp objects, hard edges and abrasive surfaces.
✔ Use suitable protective pads under the legs when placing the chairs on parquet or other sensitive flooring.
✔ Regularly inspect the stability, legs, joints and condition of the upholstery.
Care and maintenance
✔ Regularly remove dust from the upholstery using a soft brush or a vacuum cleaner set to low power and fitted with an upholstery attachment.
✔ Treat stains immediately by gently blotting them without aggressive rubbing.
✔ Use a clean white cloth, slightly dampened, and a mild detergent suitable for polyester.
✔ Test any cleaning product on an inconspicuous area before general application.
✔ Do not soak the upholstery, foam or plywood with water.
✔ Allow the material to dry naturally in a well-ventilated area.
✔ Do not use the chair while the upholstery or foam is damp.
✔ Do not use bleach, solvents, alcohol, abrasive products or aggressive chemicals.
✔ Do not use steam-cleaning equipment unless this method is expressly authorised by the manufacturer.
✔ Do not use a hair dryer, radiator or another direct heat source to dry the upholstery.
✔ Clean the iron frame using a soft, dry cloth. If a damp cloth is used, dry the metal immediately.
✔ Do not use abrasive sponges or metal objects that may scratch the finish.
✔ Wipe liquids from the iron and plywood components immediately.
✔ Avoid prolonged exposure to direct sunlight, as this may alter the appearance of the fabric and finish.
✔ Regularly inspect the screws, legs, welds, joints, seams and upholstery.
✔ Tighten the fasteners when necessary.
✔ Structural repairs must be performed only by competent persons using compatible parts.
Packaging and disposal
✔ Remove all packaging materials before using the products.
✔ Do not allow children to play with plastic film, bags, straps, staples or other packaging components. These may present a suffocation or injury hazard.
✔ Sort cardboard, plastic and other packaging materials according to local collection regulations.
✔ Do not burn the chairs or their components. Burning foam, polyester or treated plywood may generate hazardous smoke and substances.
✔ At the end of the products’ service life, dispose of them according to local regulations.
✔ Where possible, separate the plywood, foam, iron, polyester and plastic components before recycling or disposal.
