Economic operator information
✔ Manufacturer and responsible person: MAURO FERRETTI SRL
✔ Registered office: STRADA DELL’ARTIGIANATO 9, 01024, Castiglione in Teverina (VT), Italy
✔ Email: info@mauroferretti.it
✔ Distributor: Dianmar Decor SRL
✔ Address: Voluntari, Ilfov, Romania
✔ Email: contact@dianmardecor.com
Intended use
The products are intended for indoor use as coffee tables for supporting decorative items and lightweight personal belongings. They are not designed for use as seats, steps, supports for persons or children’s furniture.
Safety and warnings
✔ Place each table on a level, stable and dry surface.
✔ Check the stability of the products before use.
✔ Do not sit, stand or climb on the tables.
✔ Do not allow children to climb, sit or play on the products.
✔ Do not exceed the maximum load specified by the manufacturer. If no limit is provided, avoid overloading the products.
✔ Distribute objects evenly across the surface of each table. Avoid heavy loads concentrated in one area.
✔ Do not place heavy or unstable objects near the edges.
✔ If the tables are used separately, make sure each one is positioned securely and cannot be accidentally overturned.
✔ When placing the smaller table underneath the larger table, keep fingers and hands away from the metal frames to prevent trapping or impact injuries.
✔ Do not force one table underneath the other or stack them in an unstable position.
✔ Open and close the drawer carefully to prevent fingers from becoming trapped.
✔ Do not leave the drawer open or overload it.
✔ Do not place hot, wet, sharp or abrasive objects directly on the surfaces.
✔ Keep the products away from open flames, sparks, radiators and other strong heat sources.
✔ Do not use the tables if the structure is unstable, deformed or damaged, or if any fasteners are loose.
✔ These products are intended for indoor use only.
Use
✔ Assemble the products according to the manufacturer’s instructions if they are supplied unassembled.
✔ Make sure all fasteners are correctly installed and tightened before use.
✔ Use protective mats under glasses, containers, plant pots and decorative objects.
✔ Wipe up spilled liquids immediately to prevent damage to the surfaces.
✔ Lift each table separately by supporting its metal frame. Do not move the entire set by lifting only one piece.
✔ Do not drag or push the tables across the floor, as this may damage the furniture or flooring.
✔ Clear the surfaces and empty the drawer before moving the products.
✔ Periodically check the legs, frames, drawer, runners, joints and fasteners.
Care and maintenance
✔ Remove dust with a soft, dry cloth.
✔ Clean the wooden and MDF surfaces with a soft, slightly damp cloth and dry them immediately.
✔ Clean the metal frames with a soft, dry or slightly damp cloth.
✔ Wipe up spilled liquids and other substances immediately.
✔ Do not use abrasive sponges, solvents, bleach, concentrated alcohol or corrosive cleaning products.
✔ Use only cleaning products compatible with the materials and finishes specified by the manufacturer.
✔ Protect the tables from excessive moisture, direct sunlight and sudden temperature changes.
✔ Periodically check for rust, damaged finishes and loose joints.
Packaging and disposal
✔ Remove all packaging materials before use.
✔ Keep plastic films, bags and small packaging components away from children, as they may present a suffocation hazard.
✔ Sort and dispose of packaging materials according to local regulations.
✔ At the end of the products’ useful life, dispose of them responsibly, taking their pine wood, MDF and metal components into consideration.
